Linksys WDT11 User Manual page 24

12. Windows NT may
request further files
at this point. Type
" D : \ W P C 1 1 -
WDT11\WINNT"
(where D: is the let-
ter of your CD-
ROM rive) in the
field provided and
click the OK button.
If files are still
requested, insert
your Windows NT
CD into your CD-
ROM drive and
type "D:\i386"
(where "D" repre-
sents your CD-
Rom drive). Then,
click the Continue
button.
13. You will now reach the
screen shown here. This is
called the Resources &
Properties screen. Please
check with your other wire-
less computers for the prop-
er settings. For more infor-
mation concerning these
settings, refer to the section
called Configuring the
Network PC Card for
Windows NT. Adjust the
settings as are appropriate
and click the Continue but-
ton.
41
Instant Wireless Series
TM
Network PC Card and PCI Adapter
14. After setting the Resource and Properties fields, Windows NT will begin
installing the network components you previously selected. You may be
asked if you would like to configure the protocols with a DHCP server on
your network. If this screen comes up, check with your Network
Administrator before clicking the Yes or No button to continue.
15. Now, the network components will finish installing. If a screen similar to
that shown here appears, click the Next button to continue.
16. At this point, Windows NT will let you know that it is ready to start the net-
work. To make corrections, click the Back button. To continue, click the
Next button.
42