Migrating A Raid Array To Another Storage Device - Linksys NSS4000 Series Administrator's Manual

Migrating a RAID Array to another Storage Device

If you are migrating a RAID array from the NSS to another network NSS, ensure that you coldplug
the RAID array (versus hotplug it) into the new system as per the following:
1. Power down the NSS (from which you are removing the RAID array).
2. Remove each of the disk drives that make up the RAID array to be moved.
3. Power down the NSS to which you are migrating the RAID array.
4. Insert each of the disk drives in the RAID array into the new NSS.
NOTE: You can install the drives into the new NSS in any order (that is, you do not need to
install them in the same order or slots that they were installed in the original NSS.
5. When all the disk drives are installed, power up the NSS.
Chapter 4: Storage
Migrating a RAID Array to another Storage Device
Network Storage System (NSS) Administrator Guide
Chapter
4
48