Network Status - Linksys NSS4000 Series Administrator's Manual

• Warning: These types of messages indicate there is a problem with the NSS that requires
eventual action. They are color-coded orange. For example, if the amount of storage used for
a volume is over 90%.
• Notification: These types of messages are simply to advise of changes to the NSS. They do
not require action and are color-coded green. For example, the RAID rebuild is complete.
Storage Status
The Storage area displays details about the configured storage on the NSS, including:
• Drives: The number of physical disk drives installed.
• RAID Arrays: The number of configured RAID Arrays.
• Volumes: The number of configured volumes.
• Total Configured Capacity: The total aggregate size of all configured volumes.
• Percent Used: The total amount of the configured capacity used. The percentage is color-
coded according to the current percentage used:
- Green: 0 to 74%
- Orange: 75-89%
- Red: 90-100%

Network Status

The Network area displays the following:
• Link 1 & 2: The current status of the physical links. The status of the link can be up (color-
coded green) or down (color-coded red). If the link is not present, the status appears as
"down".
• Bonding Mode: Displays how the bonding mode for the physical links has been configured
on the Network Properties page.
• VLANs: The number of VLANs configured on the NSS.
• Link 1 IP: The IP address of the first Ethernet link.
• Link 2 IP: The IP address of the second Ethernet link (if installed). If the bonding mode is set to
"active backup" or "802.3ad", the two links appear as a single entity (i.e., "Link 1+2 IP").
Shares Status
The Shares area displays the status of the following:
• Shares: The number of configured shares.
• Connected Users: The total number of user sessions currently connected to the NSS.
Chapter 2: System
Network Storage System (NSS) Administrator Guide
(see Setting up the Link Bonding & Advertising
Chapter
2
Modes)
8