Configuring The Network Link Ip - Linksys NSS4000 Series Administrator's Manual

Configuring the Network Link IP

You need to configure the method for assigning an IP configuration to each physical and virtual
interface connected to the NSS.
NOTE: If you hotplug the Ethernet link after the initial installation of the NSS, make sure you
wait 15 seconds between the time you unplug the cable and then plug it back in. The
NSS displays the correct new settings within 10 seconds.
To set the IP address allocation method for an interface:
1. From the Manager Menu, click Network
The Network IP page appears listing each physical and virtual interface.
2. Click Edit on the row of the interface you want to configure.
The Network Link Configuration page appears.
3. Select one of the following:
• Obtain IP Address Automatically: Use a DHCP server to retrieve the IP address, netmask,
and gateway address for the interface.
• Use the Following IP Address: Enter the IP configuration details manually, in dotted-quad
notation.
4. Click Update.
Chapter 3: Network
Configuring the Network Link IP
Network Storage System (NSS) Administrator Guide
IP.
Chapter
3
19