Table of Contents
Advertisement
Password Authentication
The first window in your web-based management session will
prompt you for your system password. Choose the access level
at which you wish to work by highlighting your choice in the
drop-down menu.
If you have set the system passwords in a previous command
line or web-based management session, enter the correct pass-
word. If you haven't changed the passwords, they will be at
their defualt settings.
The default password settings are the same as their level name.
For example, the password for "manager" is "manager".
Once you have entered the correct password, you will be greet-
ed with a welcome screen and a picture of the first managed
hub in your stack. This is the unit that has Hub ID #1.
The Picture of Your Hub
You will notice that the picture of the hub at the top of your
screen looks exactly like the phsyical front panel of the
StackPro II 10/100 Dual Speed hub that you are managing.
The LEDs on the browser's picture depict the same readouts
that you would see if you were to look at the actual hub.
If a port is colored blue, it indicates that there is an active link
on that particular port.
To the immediate right of the hub picture, you will see a
graphical representation of the managed stack of hubs. The
hub that you are viewing will be indicated by a green light. To
switch the view between hubs, simply click on the hub that
you wish to view.
24
Advertisement
Table of Contents
