Modify Password
Use this command to change the passwords used for entry into
the management interfaces at different security levels.
Save Current Settings
This command will save the variables that you have defined to
the SNMP module's EEPROM. All of your settings will be
saved in the process. It is recommended that you always do
this before the end of every management session.
You will receive a message that looks like this:
Updating the EEPROM. Don't shut down the system.
Please wait...
When the save is finished, a message will read:
EEPROM updated successfully. Press any key to con-
tinue.
You may now continue with you management session or exit.
21