Chapter 2: Setup And Installation Of The Gigabit Expresscard Adapter Overview; Chapter 2: Setup And Installation Of The Gigabit Expresscard Adapter; Overview; Setup And Driver Installation - Linksys EC1000 User Manual

Gigabit ExpressCard Adapter
Chapter 2: Setup and Installation of the Gigabit ExpressCard
Adapter

Overview

This chapter will take you through all the steps necessary to set up, configure, and install the Adapter. The steps
are also available to use the Utility to uninstall the driver for the Adapter, if you should ever need to do so. After
you set up the Adapter with the Setup Utility, you will install the Adapter into your Notebook PC.
IMPORTANT: Connecting the Adapter before instructed may result in a malfunctining Adapter.
Setup Utility
1. Insert the Setup Utility CD into your PC's CD-ROM drive.
2. The Setup Utility's Welcome screen should appear on your monitor. If it does not, this means the Setup Utility
is not automatically running as it should. Start the Setup Utility manually by clicking the Start button,
selecting Run, and typing d:\autorun.exe (where "D" is your PC's CD-ROM drive).
Click the Install button to continue this Setup Utility and install the driver. Click the Uninstall tab and button
to uninstall the driver. Clicking the User Guide button opened this User Guide. To contact Linksys, click the
Contact Us tab and button. To exit this Setup Utility, click the Exit tab and button.

Setup and Driver Installation

1. If you haven't already done so, click the Install button. The Welcome screen will appear. Click the Next button
to continue the installation.

Chapter 2: Setup and Installation of the Gigabit ExpressCard Adapter

Overview

Figure 2-1: Driver Installation

Figure 2-2: Start the Installation

2