Table of Contents
Advertisement
Appendix E
2,4 GHz Restrictions
This product is designed for use with the standard, integral or dedicated
(external) antenna(s) that is/are shipped together with the equipment.
However, some applications may require the antenna(s), if removable, to
be separated from the product and installed remotely from the device by
using extension cables. For these applications, Linksys offers an R-SMA
extension cable (AC9SMA) and an R-TNC extension cable (AC9TNC). Both
of these cables are 9 meters long and have a cable loss (attenuation)
of 5 dB. To compensate for the attenuation, Linksys also offers higher
gain antennas (only for 2,4 GHz), the HGA7S (with R-SMA connector)
and HGA7T (with R-TNC connector). These antennas have a gain of 7 dBi
and may only be used with either the R-SMA or R-TNC extension cable.
Combinations of extension cables and antennas resulting in a radiated
power level exceeding 100 mW EIRP are illegal.
Third-Party Software or Firmware
The use of software or firmware not supported/provided by Linksys may
result that the equipment is no longer compliant with the regulatory
requirements.
Technical Documents on www.linksys.com/international
Follow these steps to access technical documents:
1.
Enter http://www.linksys.com/international in your web browser.
2.
Select the country or region in which you live.
3.
Click the Products tab.
4.
Select the appropriate product category.
5.
Select the product sub-category, if necessary.
6.
Select the product.
7.
Select the type of documentation you want from the "More
Information" section. The document will open in PDF format if you
have Adobe Acrobat installed on your computer.
NOTE:
product or you cannot find the information you need, please contact
your local sales office or visit www.linksys.com/international
87
87
If you have questions regarding the compliance of this
Regulatory
Media Center Extender
Media Center Extender
Advertisement
Table of Contents
