NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the
base
cover.
2. Remove the battery.
3. Remove the
wireless
card.
Procedure
1. Peel off the tape that secures the I/O-board cable to the I/O board.
2. Disconnect the I/O-board cable from the I/O board.
3. Peel off the tape that secures the power and volume-buttons board-cable to the palm-rest assembly.
4. Disconnect the power and volume-buttons board-cable from the I/O board.
5. Disconnect the coin-cell battery-cable from the I/O board.
6. Remove the two screws (M2x3.5) that secures the I/O board to the palm-rest assembly.
7. Lift the I/O board off the palm-rest assembly.
50
Removing the I/O board
Removing the I/O board
computer. After working inside your computer, follow the instructions in
29
After
www.dell.com/