NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
NOTE:
The rubber grommets may get pushed out while replacing the speaker. Ensure that the rubber grommets are in their
position after placing the speaker on the palm-rest assembly.
1. Using the alignment posts, align and place the speakers on the palm-rest assembly.
2. Replace the rubber grommets if they are pushed up while replacing the speaker.
3. Route the speaker cable through the routing guides on the palm-rest assembly.
4. Adhere the pieces of tape that secure the speaker cable to the palm-rest assembly.
5. Connect the speaker cable to the system board.
Post-requisites
1. Replace the battery.
2. Replace the
base
cover.
32
Replacing the speakers
Replacing the speakers
computer. After working inside your computer, follow the instructions in
16
After
www.dell.com/