Related Manuals for D-Link DCS-F4605EK
Summary of Contents for D-Link DCS-F4605EK
- Page 1 Getting Started Guide for D-Link Vigilance Network Camera PRODUCT QUICK INSTALLATION GUIDE DCS-F4605EK 5MP Day & Night Outdoor Vandal-Proof Dome PoE Network Camera...
- Page 2 If you do not have a PoE switch, power the camera with a 12V DC power supply (not included). If you have a Network Video Recorder (NVR), connect the camera to your NVR and follow the instructions for your NVR. QUICK INSTALLATION GUIDE | DCS-F4605EK...
- Page 3 192.168.0.120 address. You can find out what IP address was assigned to the camera by checking your router’s DHCP status or by running the Tool for Cameras and NVR software downloadable from https:// www.dlink.com.au/Camera-Search QUICK INSTALLATION GUIDE | DCS-F4605EK...
- Page 4 The default username is “admin” and password is “admin”. It is recommended to change the default password to a strong password that includes lower and upper case letters, numbers and special symbols. Enter username: Enter password: QUICK INSTALLATION GUIDE | DCS-F4605EK...
- Page 5 STEP 4. (Optional) Add your camera to D-Link CCTV app. Add your camera to DCMS+ Surveillance Software (free download): https://www.dlink.com.au/DCMS Add your camera to your NVR. Please follow your NVR’s setup guide. QUICK INSTALLATION GUIDE | DCS-F4605EK...
-
Page 6: Factory Reset
Factory Reset If you forgot the camera password or need to revert the camera to its factory settings: Open the camera’s cover and press the Reset Button for 5 seconds: Reset Button QUICK INSTALLATION GUIDE | DCS-F4605EK...