Mount As Network Drive - Buffalo LinkStation 420DS User Manual

The following tasks may be performed from the LinkStation's properties page.
Name
Configuration
IP Address

Mount as Network Drive

You can easily map a shared folder as a network drive using NAS Navigator2.
1
Double-click the
2
Right-click on the LinkStation's icon and choose Map Share.
Note: The following shared folders can be mounted as network drives from NAS Navigator2: share, share2,
share3, share4, usbdisk1, usbdisk2, usbdisk3, usbdisk4, usbdisk5
3
An icon for the mapped share will appear in Computer or My Computer. You can use this network drive just like
any other hard drive.
Description
Click Settings to open the configuration interface.
Check Use DHCP to assign an IP address from the DHCP server automatically. If
there is no DHCP server in the network, you cannot use this function.
Check Renew IP address to obtain an IP address from the DHCP server.
You can manually enter an IP address, subnet mask, and default gateway.
icon to start NAS Navigator2.
67