Fujitsu M10 Product Notes page 106

Figure 8-12
Releasing connected XSCF board
A
For SPARC M10-4, remove the four screws fixing the XSCF board (A in the
■
figure) and rear cover. Tilt the right lever of the XSCF mount by fingers
about 5 mm (0.2 in.) to the right (B in the figure). Lift up the right side of the
XSCF board and release connection of the connector (C in the figure).
Fujitsu M10/SPARC M10 Systems Product Notes for XCP Version 2043 ･ October 2013
94