Fujitsu AIRSTAGE UTY-ASGXZ1 Operating Manual page 35

Table of Contents

Network Topology display

Displays in tree form the data acquired when this tool (System Tool) started.

In addition, the date and time when displayed are displayed at the top of the tree.

Notation contents

S-AMP(X)···Signal Amplifier (address)

Blue background: When the number of units connected in 1 segment exceeded 6(.

Red background: When the address of signal amplifier is redundant.

Yellow background: When data cannot be acquired from signal amplifier, but they ex-

White background : Normal state other than the above.

Indoor Unit(X)(Y)···Indoor unit (refrigerant address)(unit address)

Outdoor Unit(X)(Y)···Outdoor unit (refrigerant address)(unit address)

Controller(X)(Y)···Peripheral unit (system address)(unit address)

R.B.U(X)(Y)···R.B.unit(refrigerant address)(unit address)

When the same address exists in indoor unit, outdoor unit, and controller respectively,

red background is displayed.

In addition, "?" is added before the unit name for the unit corresponding to both "Type

A" and "Type B". In this case, confirm by relevant type of each series described in

*1 In the case of Type B, the signal amplifier of yellow background color and the

Note

units connected to it are not displayed at the correct segment position.

CSV button

The information displayed at

[CSV configuration]

• Communication data (reference data) of each unit acquired by this processing

Note

Since the address of each unit is the address used in communication, it is differ-

ent from the screen display address.

• Tree display displayed on the screen

Note

• The signal amplifier background color is replaced by the following symbols.

White : None / Blue: * / Red: ** / Yellow: ***

•

The indoor unit, outdoor unit and controller background color are replaced by

the following symbols.

White: None / Red: **

Close button

Closes this screen.

When matched up to the connection point, S-AMP(x) count (number

duplicated) is displayed.

ist in the data acquired from another unit (indoor unit, etc.).(*1)

can be saved to CSV file.

Table of Contents