Table of Contents
Advertisement
3. Disassembly and Reassembly
3.3.34.26. Punch Dust Full Sensor
1) Follow the step 1~4 in Entrance Motor disassembly. (Refer to 3.3.34.2.)
2) Remove 1 screw. Unplug the connector. Then, remove the Punch Dust Full Sensor Sub Assy.
3) Remove 1 screw. Then, remove the Punch Dust Full Sensor.
Copyright© 1995-2017 SAMSUNG. All rights reserved.
3-112
Advertisement
Table of Contents
Troubleshooting
