Punch Dust Full Sensor - Samsung MultiXpress X4 Series Service Manual

3. Disassembly and Reassembly

3.3.35.26. Punch Dust Full Sensor

1) Follow the step 1~4 in Entrance Motor disassembly. (Refer to 3.3.34.2.)
2) Remove 1 screw. Unplug the connector. Then, remove the Punch Dust Full Sensor Sub Assy.
3) Remove 1 screw. Then, remove the Punch Dust Full Sensor.
3-112 Copyright© 1995-2017 SAMSUNG. All rights reserved.