Remote Transmitter Care
Replacing the Remote Battery
If the indicator does not come on when the button is pressed, replace the battery.
Battery type: CR2032
1. Remove the built-in key.
2. Remove the upper half of the cover by
carefully prying on the slot with key grip.
u
Wrap a key grip with a cloth to prevent
scratching the keyless remote.
Remove carefully to avoid losing the
u
buttons.
1Replacing the Remote Battery
4 3
CHEMICAL BURN HAZARD
The battery that powers the remote
transmitter can cause severe internal burns
and can even lead to death if swallowed.
Keep new and used batteries away from
children.
If you suspect that a child has swallowed
the battery, seek medical attention
immediately.
CAUTION: Danger of explosion if battery is
incorrectly replaced. Replace only with the same or
equivalent type.
CAUTION: Do not exposed to excessive heat such as
sunshine, fire or the like, that can result in an
explosion or the leakage of flammable liquid or gas
during use, storage or transportation.
CAUTION: Do not dispose of a battery into fire or a
hot oven, or give mechanically crushing or cutting of
a battery, that can result in an explosion.
CAUTION: Do not subjected to extremely low air
pressure at high altitude that may result in an
explosion or the leakage of flammable liquid or gas.
Continued
WARNING
575