Zenith HydroTap Wave Installation Instructions

5
Familiarise yourself with the tap connections
Boiling,
Boiling chilled,
Chilled sparkling
Chilled
RED
boiling
tube BLUE
(BC, Chilled
B only) tube
(BC, C only)
BLUE
JG
CLEAR
pipe
Vent
tube
USB
(BC,
B only) USB
Boiling
chilled sparkling
RED
RED
boiling
boiling
tube
tube
WHITE
CLEAR
CLEAR
JG
Vent
Vent
pipe
tube
tube
BLUE
USB
USB
JG
pipe
6
Command Centre connections
USB
Boiling out
Chilled out
Vent
Sparkling out
Ambient out
7
Cleaning and general maintenance
• Wipe surfaces with a damp cloth and then wipe dry
with a clean, dry cloth.
!
IMPORTANT - For Touch-Free Wave Tap:
WHITE
• Do not use air-drying disinfectant sprays.
JG
• Do not use abrasives to clean the sensor lenses at
pipe
the sides, top and rear of the Touch-Free Wave Tap.
• This could cause permanent malfunction and void
warranty.
Boiling
ambient
BLUE
JG
pipe
Connected to the Tap.
Red silicone tube from tap. Cut to length.
(BC, C) Blue silicone tube from tap,
(BCS, CS) Blue JG pipe from tap.
Cut to length.
Clear silicone tube from tap. Cut to
length.
White JG pipe from tap. Cut to length.
Blue JG pipe from tap. Cut to length.
Zenith Heaters Limited
IRD/GST No. 95 640 729
18 Kawakawa Place,
Westgate, Auckland 0814
New Zealand
Ph +(64 9) 838 8612
Free Call 0800 558 055
zenithwater.co.nz
Installation instructions
Zenith
HydroTap
Wave, Elite, Classic Plus, Classic
B, BA, BC, BCS, CS, C
Visit our website to
download the manuals