Advertisement
14002573-001 HP970 HUMIDISTAT AND TP970 THERMOSTAT MODERNIZATION KIT
Prepare Location For Humidistat/
Thermostat
Remove and discard the old Thermostat/Humidistat
and rings.
Remove the tubing from the fitting.
Clean the fitting, if required.
Determine the appropriate installation figure number
reference from Table
Identify and install the correct mounting parts according
to the figure number determined in Step 4.
NOTE:
The cream-colored paper insert can be
painted to match the wall or be used as a
template to cut wallpaper.
nstall Humidistat/Thermostat
Feed the tubing through the mounting parts.
Attach the tubing to the Humidistat/Thermostat
backplate.
Attach the backplate using the screws furnished with
the Humidistat/Thermostat.
Remove any shipping stops and press the Humidistat/
Thermostat onto the backplate until the retaining clips
on the backplate engage.
Proceed to HUMIDISTAT CALIBRATION or
THERMOSTAT CALIBRATION.
Advertisement
