3
Operating instructions
32
3.4
Running a pre-programmed protocol from the PC
WARNING! Check that the high voltage is turned off before opening the safety
lid. The HV ON indicator on the front panel should not light.
3.4.1
Ettan IPGphor 3 Control Software
Ettan IPGphor 3 Control Software allows the user to control the instrument
The
and capture data from the serial port with a Windows® based computer and
serial cable or USB converter.
The following functions are provided:
•
Selecting run protocols by choosing strip length and pH gradient
•
Editing of the protocols and transferring them to the instrument
•
Starting, stopping and pausing of IEF runs on the instrument:
•
Acquisition of run data, which is displayed in the graph and the numerical
displays
•
Event logging
•
Printing and saving the display, and saving data and session log to a
Microsoft Excel spreadsheet file
For detailed instructions on installation and usage of Ettan IPGphor 3 Control
Software, and also on computer instrument connection, please refer to the Ettan
IPGphor 3 Software User Manual.
Ettan IPGphor 3 Instrument User Manual 11-0034-58 Edition AB