Power Cord Specifications - Cisco ASA 5508-X Manual

Power Cord Specifications

DRAM
Internal Flash
Power
Environment
Temperature
Relative humidity
Maximum altitude
Acoustic Noise
Power Cord Specifications
Each power supply has a separate power cord. Standard power cords are available for connection to the security
appliance.
If you do not order the optional power cord with the system, you are responsible for selecting the appropriate
power cord for the product. Using a incompatible power cord with this product may result in electrical safety
hazard. Orders delivered to Argentina, Brazil, and Japan must have the appropriate power cord ordered with
the system.
Note
The following illustrations show the cord, connector, and plug for each country listed in the table above.
Figure 4: Argentina (CAB-ACR)
Overview
8
Total: 8 GB
Allocated to FW/VPN: 4 GB
Allocated to Module: 4 GB
8 GB
60 W
Operating: 0 to 40°C (32 to 104°F)
Nonoperating: -25 to 70°C (-13 to 158°F)
Operating: 90%
Nonoperating: 10 to 90%
Operating: 3048 m (10,000 ft)
Nonoperating: 4572 m (15,000 ft)
Typical: 41.6 dBA
Maximum: 67.2 dBA
Only the approved power cords provided with the security appliance are supported. The following table lists
the supported power cords.
Overview