Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG FFB93807PM
Summary of Contents for AEG FFB93807PM
- Page 1 FFB93807PM User Manual Dishwasher USER MANUAL...
-
Page 2: Table Of Contents
14. ENVIRONMENTAL CONCERNS..............28 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. - Page 3 ENGLISH responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...
-
Page 4: Safety Instructions
The operating water pressure (minimum and • maximum) must be between 0.5 (0.05) / 10 (1.0) bar (MPa) Follow the maximum number of 14 place settings. • If the supply cord is damaged, it must be replaced by •... - Page 5 ENGLISH 2.4 Use be replaced, this must be carried out by our Authorised Service Centre. • Do not put flammable products or • Connect the mains plug to the mains items that are wet with flammable socket only at the end of the products in, near or on the appliance.
-
Page 6: Product Description
They are not spare parts are relevant for all intended to be used in other models. applications and are not suitable for •... -
Page 7: Control Panel
ENGLISH 3.1 Internal light The lamp goes off when you close the door or switch the appliance off. The appliance has an internal lamp. It Otherwise, it goes off automatically after comes on when you open the door or some time to save energy. switch the appliance on while the door is open. -
Page 8: Programmes
Indicator Description Delay indicator. It is on when you set the delay start. GlassCare indicator. ExtraPower indicator. ExtraHygiene indicator. 5. PROGRAMMES The order of the programmes in the table may not reflect their sequence on the control panel. Programme... - Page 9 ENGLISH Programme Dishwasher Degree of Programme phases Options load soil Crockery, • Prewash cutlery, pots, • Dishwashing 50 - pans 60 °C • Intermediate rinse • Final rinse 60 °C • Drying • AirDry None Cleaning • Cleaning 70 °C the appli‐...
-
Page 10: Options
Water (l) Energy (kWh) Duration (min) 1) 2) Programme 11.8 0.970 11.0 0.620 12.1 1.220 10.6 0.710 0.010 11.9 0.980 1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of dishes and the degree of soil can change the values. -
Page 11: Settings
ENGLISH 6.3 ExtraHygiene The display shows the updated programme duration. This option provides better cleaning results by keeping the temperature 6.2 ExtraPower between 65 and 70 °C for at least 10 This option improves the dishwashing minutes during the last rinsing phase. results of the selected programme. - Page 12 Water hardness German de‐ French de‐ mmol/l Clarke de‐ Water softener lev‐ grees (°dH) grees (°fH) grees 47 - 50 84 - 90 8.4 - 9.0 58 - 63 43 - 46 76 - 83 7.6 - 8.3 53 - 57...
- Page 13 ENGLISH in the same cycle or at the beginning of When the rinse aid chamber is empty, the next programme. This activity the rinse aid indicator is on, notifying to increases the total water consumption of refill rinse aid. If the drying results are a programme by additional 4 litres and satisfactory while using multi-tablets only, the total energy consumption of a...
-
Page 14: Before First Use
How to deactivate AirDry CAUTION! Do not try to close the Make sure the appliance is in user mode. appliance door within 2 1. Press Delay. minutes after automatic opening. This can cause • The indicator still flashes. damage to the appliance. -
Page 15: Daily Use
ENGLISH CAUTION! The compartment (B) is for rinse aid only. Do not fill it with detergent. CAUTION! Only use rinse aid designed specifically for dishwashers. 6. Turn the cap of the salt container 1. Open the lid (C). clockwise to close the salt container. 2. - Page 16 CAUTION! lower level. Do not exceed the max load There are two ways of lowering the capacity of 18 kg. basket depending on the loading: • If there is a full load of plates, CAUTION! slightly push the basket down.
- Page 17 ENGLISH 9.3 Setting and starting a Do not try to close the programme appliance door within 2 minutes after AirDry Starting a programme automatically opens it as this may cause damage to the 1. Press the on/off button to activate the appliance.
-
Page 18: Hints And Tips
10. HINTS AND TIPS 10.1 General 10.2 Using salt, rinse aid and detergent Follow the hints below to ensure optimal cleaning and drying results in daily use • Only use salt, rinse aid and detergent and to protect the environment. -
Page 19: Care And Cleaning
ENGLISH 10.5 Before starting a 4. When the programme is complete, adjust the water softener according programme to the water hardness in your area. 5. Adjust the released quantity of rinse Before you start the selected aid. programme, make sure that: •... - Page 20 • Using short-duration programmes 1. Turn the filter (B) counterclockwise regularly can cause grease and and remove it. limescale buildup inside the appliance. Run long-duration programmes at least twice a month to prevent the buildup. 11.2 Removal of foreign...
- Page 21 ENGLISH 2. Wash the spray arm under running 7. Reassemble the filters (B) and (C). water. Use a thin pointed tool, e.g. a 8. Put back the filter (B) in the flat filter toothpick, to remove particles of soil (A). Turn it clockwise until it locks. from the holes.
- Page 22 11.7 Cleaning the ceiling 2. To detach the spray arm from the basket, press the spray arm upwards spray arm and simultaneously turn it clockwise. We recommend to clean the ceiling spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results.
-
Page 23: Troubleshooting
ENGLISH 5. To install the spray arm (C) back, insert the mounting element (B) in the spray arm and fix it in the delivery tube (A) by turning it clockwise. Make sure that the mounting element locks into place. 6. Install the cutlery drawer on the sliding rails and block the stoppers. - Page 24 Problem and alarm code Possible cause and solution The appliance does not • Make sure that the sink spigot is not clogged. drain the water. • Make sure that the interior filter system is not clogged. The display shows i20.
- Page 25 ENGLISH Problem and alarm code Possible cause and solution The remaining time in the • This is not a defect. The appliance is working correctly. display increases and skips nearly to the end of the pro‐ gramme duration. Small leak from the appli‐ •...
- Page 26 12.1 The dishwashing and drying results are not satisfactory Problem Possible cause and solution Poor washing results. • Refer to "Daily use", "Hints and tips" and the basket loading leaflet. • Use more intensive washing programme. • Activate the ExtraPower option to improve the washing results of a selected programme.
-
Page 27: Technical Information
ENGLISH Problem Possible cause and solution Odours inside the appliance. • Refer to "Internal cleaning". • Start the programme with a descaler or a cleaning product designed for dishwashers. Limescale deposits on the ta‐ • The level of salt is low, check the refill indicator. bleware, on the tub and on the •... -
Page 28: Environmental Concerns
13.1 Link to the product together with the user manual and all other documents provided with this information sheet appliance. The QR code on the energy label For more detailed information about the supplied with the appliance provides a energy label, visit web link to the product information sheet. - Page 32 www.aeg.com/shop...