Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG FFB53627ZM
Summary of Contents for AEG FFB53627ZM
- Page 1 FFB53627ZM User Manual Dishwasher USER MANUAL...
-
Page 2: Table Of Contents
14. ENVIRONMENTAL CONCERNS..............25 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. - Page 3 ENGLISH responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...
-
Page 4: Safety Instructions
The operating water pressure (minimum and • maximum) must be between 0.5 (0.05) / 10 (1.0) bar (MPa) Follow the maximum number of 13 place settings. • If the supply cord is damaged, it must be replaced by •... - Page 5 ENGLISH 2.4 Use be replaced, this must be carried out by our Authorised Service Centre. • Do not put flammable products or • Connect the mains plug to the mains items that are wet with flammable socket only at the end of the products in, near or on the appliance.
-
Page 6: Product Description
2.6 Disposal separately: These lamps are intended to withstand extreme physical conditions in household appliances, WARNING! such as temperature, vibration, Risk of injury or suffocation. humidity, or are intended to signal • Disconnect the appliance from the information about the operational mains supply. -
Page 7: Control Panel
ENGLISH 4. CONTROL PANEL On/off button Option button Program button Indicators Programme indicators Start button Display Delay button 4.1 Indicators Indicator Description Salt indicator. It is on when the salt container needs refilling. It is always off while the programme operates. Rinse aid indicator. -
Page 8: Programmes
5. PROGRAMMES The order of the programmes in the table may not reflect their sequence on the control panel. Programme Dishwasher Degree of Programme phases Options load soil Crockery, Normal, • Prewash • ExtraPower cutlery, pots, lightly dried- •... - Page 9 ENGLISH Programme Dishwasher Degree of Programme phases Options load soil • Prewash 1) This programme offers the most efficient use of water and energy consumption for crockery and cut‐ lery with normal soil. This is the standard programme for test institutes. This programme is used to as‐ sess compliance with the Ecodesign Comission Regulation (EU) 2019/2022.
-
Page 10: Options
6. OPTIONS prevents rapid changes in the Desired options must be dishwashing temperature of the selected activated every time before programme and reduces it to 45 °C. you start a programme. It is not possible to activate How to activate GlassCare or deactivate options while a programme is running. - Page 11 ENGLISH How to set the programme the indicators selection mode flash and the display is blank. The appliance is in programme selection 7.2 The water softener mode when the programme indicator is on and the display shows the The water softener removes minerals programme duration.
- Page 12 Regeneration process Each performed softener rinse (possible For the correct water softener operation, more than one in the same cycle) may the resin of the softener device needs to prolong the programme duration by be regenerated regularly. This process is...
- Page 13 ENGLISH How to deactivate the rinse CAUTION! aid empty notification Do not try to close the appliance door within 2 Make sure the appliance is in user mode. minutes after automatic 1. Press Start. opening. This can cause damage to the appliance. •...
-
Page 14: Before First Use
Press any button to exit the cycle mode. counter. 2. Press and hold Start and Option for After reaching 65535, the 5 seconds. cycle counter restarts. The displays shows uC and then the number of cycles. -
Page 15: Daily Use
ENGLISH 8.2 How to fill the rinse aid CAUTION! dispenser Only use rinse aid designed specifically for dishwashers. 1. Press the release button (D) to open the lid (C). 2. Fill the dispenser (A) until the rinse aid reaches the marking ''MAX''. 3. - Page 16 9.2 Setting and starting a the energy consumption and the programme duration. After closing the programme door, the appliance continues from the point of interruption. The Auto off function If the door is opened for This function decreases energy...
-
Page 17: Hints And Tips
ENGLISH 10. HINTS AND TIPS 10.1 General 10.2 Using salt, rinse aid and detergent Follow the hints below to ensure optimal cleaning and drying results in daily use • Only use salt, rinse aid and detergent and to protect the environment. designed for dishwasher. -
Page 18: Care And Cleaning
4. When the programme is complete, • Make sure that the spray arms can adjust the water softener according move freely before you start a to the water hardness in your area. programme. 5. Adjust the released quantity of rinse 10.5 Before starting a... - Page 19 ENGLISH programmes at least twice a month to prevent the buildup. 11.2 Removal of foreign objects Check the filters and the sump after each use of the dishwasher. Foreign objects (e.g. pieces of glass, plastic, bones or toothpicks, etc) decrease the cleaning performance and can cause damage to the drain pump.
- Page 20 2. Wash the spray arm under running 7. Reassemble the filters (B) and (C). water. Use a thin pointed tool, e.g. a 8. Put back the filter (B) in the flat filter toothpick, to remove particles of soil (A). Turn it clockwise until it locks.
-
Page 21: Troubleshooting
ENGLISH 12. TROUBLESHOOTING to contact an Authorised Service WARNING! Centre. Improper repair of the Refer to the below table for information appliance may pose a on possible problems. danger to the safety of the user. Any repairs must be With some problems, the display shows performed by qualified an alarm code. - Page 22 Problem and alarm code Possible cause and solution The temperature of the wa‐ • Make sure that the temperature of the inlet water does ter inside the appliance is not exceed 60°C. too high or malfunction of • Switch the appliance off and on.
- Page 23 ENGLISH Problem and alarm code Possible cause and solution The appliance trips the cir‐ • The amperage is insufficient to supply simultaneously all cuit-beaker. the appliances in use. Check the socket amperage and the capacity of the meter or turn off one of the applian‐ ces in use.
- Page 24 Problem Possible cause and solution There are stains and dry water • The released quantity of rinse aid is not sufficient. Ad‐ drops on glasses and dishes. just the rinse aid dosage to a higher level. • The quality of the rinse aid can be the cause.
-
Page 25: Technical Information
ENGLISH Refer to "Before first use", "Daily use", or "Hints and tips" for other possible causes. 13. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 598 / 850 / 622 Voltage (V) 220 - 240 Electrical connection Frequency (Hz) Water supply pressure Min. - Page 28 www.aeg.com/shop...