Assembly Instructions: Running Direction Of Chain; Assembly Instructions: Lubricating Points - Bosch rexroth SE 2/C Series Assembly Instructions Manual

)
*
Flat top chain
Fig. 25: Lubricating points
7.6.10

Assembly instructions: Running direction of chain

Failure of the conveyor chain (fl at top chain / accumulation roller chain with
small parts protection)

Operating the chain against its running direction can result in conveyor chain
failure or even crashing. There is a risk of damage to property.

Make sure the chain is installed in the proper running direction.
Flat top chain
Fig. 24: Running direction of chain
7.6.11

Assembly instructions: Lubricating points

Failure of the conveyor chain (fl at top chain / accumulation roller chain)

Inadequate lubrication of the conveyor chain can result in conveyor chain
failure or even crashing. There is a risk of damage to property.

The conveyor chain used in this product comes lubricated.

Lubricate the conveyor chain before the commissioning with
Structovis GHD 0 842 904 229, using 1–2 g oil/m of chain,
then every 1,000 hrs with 2–3 g oil/m of chain.
)
*
Accumulation roller chain
*) Also lubricate the sides of the fl at top chain (curve + section)
Due to the system, the lubricant may be discharged.
NOTICE
Accumulation roller chain with small parts protection
NOTICE
Accumulation roller chain Vplus
3 842 358 737/2022-08, MIT: SE 2/C-..., SE 2/R-..., Bosch Rexroth AG
Assembly 39/108