Assembly Instructions: Unwinding Of The Chain From The Chain Reel - Bosch rexroth SE 2/C Series Assembly Instructions Manual

38/108 Assembly
Fig. 23: Unwinding of the chain from the chain reel
Bosch Rexroth AG, MIT: SE 2/C-..., SE 2/R-..., 3 842 358 737/2022-08
7.6.9

Assembly instructions: Unwinding of the chain from the chain reel

Failure of the conveyor chain (fl at top chain / accumulation roller chain)

Deformations such as bending and/or twisting of the chain,
e.g., by tilting the chain reel during installation, can result in conveyor chain
failure and even crashing. There is a risk of damage to property.

Make sure the chain remains straight and can leave the chain reel smoothly
during installation.

Make sure the chain reel cannot tilt during installation.

If the chain reel does tilt during installation and the chain is deformed:
Use the disassembly tool to remove the affected area, with a generous margin
on either end.
NOTICE
563 833-39