Removing The Document Feed Tray; About The Canon Imageformula Driver Setting Tool - Canon imageFORMULA RS40 User Manual

5
Click [OK].
6
Click [Close] to close the imageFORMULA Driver Setting
Tool.

Removing the Document Feed Tray

When you will store or otherwise not use the scanner for a long period
of time, remove the document feed tray.
About the Canon imageFORMULA
Driver Setting Tool
What is Canon imageFORMULA Driver
Setting Tool?
The Canon imageFORMULA Driver Setting Tool can be used to
check the information of the scanner, or to configure the maintenance
settings.
Canon imageFORMULA Driver Setting Tool consists of the following
tabs.
[Information] tab
You can check the firmware's version information and scanner
information.
[Maintenance] tab
You can reset the counter of the roller, or carry out the shrinkage rate
control.
[Control] tab
You can carry out the control settings of hardware and drivers, and
perform the read or write of the control settings.
From the configuration of the hardware, you can set the automatic
power-off function.
[Diagnosis] tab
You can output or delete the log file.
Start-up of the Canon imageFORMULA
Driver Setting Tool
Click the Start button, then click [Canon RS40] - [Canon
imageFORMULA Driver Setting Tool] in that order.
Canon imageFORMULA Driver Setting Tool will start.
Hint
In Windows 8.1, it is registered at the following location.
48