Auto Power Off Setting - Canon imageFORMULA RS40 User Manual

Auto Power Off Setting

The scanner automatically turns off if 4 hours elapse without scanning
or another operation being performed.
To disable this setting, follow the procedure below.
IMPORTANT
Log on to Windows as an Administrator.
1
Click the Start button, and then click [Canon RS40], and
[Canon imageFORMULA Driver Setting Tool].
imageFORMULA Driver Setting Tool starts.
Hint
In Windows 8.1, it is registered at the following location.
2
Click the [Control] tab.
3
Click the [Setting] button of [Hardware].
4
Clear the [Turn off automatically after 4 hours] check box.
47