Step 3: Scan Photos And Save - Canon imageFORMULA RS40 User Manual

• Do not wear loose clothing or jewelry that may get caught in the
scanner while you are using it, as this may result in personal injury.
Be extra careful of neckties and long hair. If anything gets caught in
the scanner, immediately turn OFF the power switch, and
disconnect the power cord from the power outlet to stop scanning.
• Always smooth out any folds or curls in your photos before placing
them into the feeder. If the leading edge of a photo is curled, it may
cause a paper jam.
• If feeding stops due to a system error or paper jam while the
scanner is scanning, resolve the problem, make sure that the
scanned image of the last page that was successfully fed has been
stored, and then resume scanning the remaining photos.
• After you finish scanning, push in the document eject tray to prevent
damage to the scanner while it is not being used.
• If double-feeding occurs, press the scanner's DFR button to
continue the scan, or clear the [Detect by Ultrasonic] check box in
the [Feeding] tab on the scanner driver settings screen.

Step 3: Scan Photos and Save

With this device, you can scan documents by operating the panel
buttons or the applications on a computer.
CaptureOnTouch is a scanning application that enables you to scan a
document with a simple operation merely by selecting the screen
panel.
For details on CaptureOnTouch, see the Help of CaptureOnTouch.
(See p. 33)
21