Installing The Software - Siemens Gigaset USB Stick 108 Manual

Hide thumbs Also See for Gigaset USB Stick 108:

Table of Contents

Installing the Gigaset USB Stick 108

Installing the software

Please remember:

Do not insert the Gigaset USB Stick 108 into a spare USB port on your PC until the

installation software prompts you to do so.

First, the software included in the scope of delivery must be installed. This software not

only includes the driver software for the USB device, it can also be used as a

configuration and monitoring tool, the Gigaset WLAN Adapter Monitor.

Only this software has been written especially for the Gigaset USB Stick 108. There are

similar drivers available in the Windows driver databases, but, as a rule, such drivers do

not fully cover all the features or they function in a completely different manner.

Do not connect the Gigaset USB Stick 108 to your PC until prompted to do so by the

installation program. If you connect the Gigaset USB Stick 108 to your PC before

installing the software, Windows will automatically recognise the device and show the

dialog box prompting selection of the appropriate driver. Click on Cancel to close the

dialog box. Remove the Gigaset USB Stick 108 from the PC and install the software first.

Please remember:

You may require administrator rights on your PC for the installation process.

Information for users with Windows 98SE/ME:

If you are prompted to restart your computer during installation, click on Restart.

After restarting, installation continues automatically. You should now follow the

instructions and installation steps shown below.

Have your Windows Installation CD to hand. You may be prompted to insert it.

Running installation

Close all running programs.

Insert the CD-ROM supplied into the CD-ROM drive of your PC and wait until the

welcome screen appears. If this screen does not appear automatically, start

installation manually:

– Open Windows Explorer.

– Select the CD-ROM drive.

– Double-click start.exe.

The language selection screen appears

Select the language.

You will now see a screen showing the contents of the CD-ROM.

Table of Contents