Checking Connection Quality - Siemens Gigaset USB Stick 108 Manual

Displaying QuickInfo for the connection
If you point the mouse over the icon in the taskbar, you will see a small window that
displays the connection properties.
The following properties are shown:
u
SSID (Service Set Identifier) in the Connection line
u
the transmission rate (in Mbps) in the Speed line
u
the transmission quality (in %) in the Link Quality line
If there is no connection, you will see a red cross over the icon and in QuickInfo,
Disconnected is displayed.

Checking connection quality

The Adapter Monitor icon changes gradually depending on the current connection
quality. The better the connection quality, the higher the transmission speed.
With reasonable to poor connection:
ì
If possible, move your PC closer to the connection partner for greater field strength.
No WLAN available (red cross over bar)
There is no WLAN within range of your Gigaset USB Stick 108 that
you could connect to.
ì
Or
ì
Check the configuration of the Access Point and adjust the
Gigaset USB Stick 108 settings accordingly.
Change your location to reduce the distance to a connection
partner.
Installing the Gigaset USB Stick 108
13