Siemens Gigaset USB Stick 108 Manual page 34

The list shows the following parameters for each connection partner:
SSID
BSSID (MAC Address) Shows the connection partner's physical address
Channel
Security
Signal
Transmission Mode
XR
Network Mode
Establishing a connection
ì
Double-click in the list on the connection partner with which you want to establish
a connection.
This connects your PC to the connection partner.
Note:
If your network adapter's active configuration profile is not compatible with the
connection partner's settings, for example the encryption has not been set correctly,
you will first see the Configuration – Security tab:
ì
Change the settings required for the connection.
Or
ì
Select a saved profile.
Then the connection will be set up automatically.
Configuring the Gigaset USB Stick 108
Shows the connection partner's ID
(see "SSID (Service Set Identifier)" on page 18).
(Basic Service Set Identifier).
In networks with Infrastructure mode, the BSSID corresponds
to the MAC address of the Access Point.
Shows the radio channel the connection partner uses to
transmit data (see "Channel" on page 19).
Shows whether radio traffic to the connection partner is
encrypted (see "Configuration – Security" on page 21). If this is
the case, you will see a key icon.
Shows the signal strength of the radio traffic between your PC
and the connection partner as a percentage
(see "Signal Strength" on page 29).
Shows the connection partner's current transmission mode
(see "Transmission mode" on page 20).
Shows whether the Access Point's XR function (eXtended
Range) is active. This function is activated if a range is too large
to establish a connection. It increases the range and decreases
the transmission rate.
Shows the connection partner's current network mode
(see "Operating mode" on page 18).
33