Making ice cubes
o Fill the ice cube tray ¾'s full with water and place it into the
freezer compartment.
o After the water is completely frozen and turned to ice, you can
twist the ice cube tray (as shown in the drawing below) to
dispense the ice.
o If you wish the ice to form more quickly, then you should turn
the thermostat dial to position <6> for a short period of time.
Once the ice is made, you should return the thermostat dial to
the normal position of <3>.
Normal operating noises
Ice cracking noise
o Can be heard during the automatic defrosting process.
o Can be caused by expansion and contraction within the freezer
compartment.
Short cracking noise
o Can be heard when the thermostat turns the compressor on and
off.
Compressor noise
o There will be an operating noise when the compressor is running.
o After installation, the compressor may be noisier for a short
period of time.
Bubbling and burbling sound
o This noise is emitted as the coolant flows through the pipework
within the fridge.
Water flowing sound
o This is caused by water flowing into the evaporating tray during
the defrosting process and can be heard whilst the fridge is
defrosting.
14