Panasonic AK-HRP1010G Operating Instructions Manual page 31

7 [COARSE] dial
8 [IRIS] display
9 [AUTO] button
10 [CLOSE] button
11 [M.PED] display
12 [IRIS LOCK] button
Adjusts how much the iris is opened or closed when the [IRIS] lever is moved.
Dial operation
This is enabled only when [MAINTENANCE] > [IRIS LEVER SETTING] > [LEVER MODE]
is set to "ABS".
Turn right (clockwise) (OPEN):
Turn left (counterclockwise) (CLOSE):
This display shows the current iris setting.
Use this button to enable the auto iris function.
For details on the auto iris function, see the following page.
"Iris (IRIS)" (see page 45)
Status displays
On: Enables the auto iris function.
Off: Enables manual adjustment of the iris using the [IRIS] lever.
Use this button to forcibly set the iris to CLOSE (closed).
Status displays
On: Forcibly sets the iris to CLOSE.
Off: Cancels iris CLOSE.
This display shows the master pedestal value.
Use this button to disable (lock) iris operation.
Lock range
Status displays
Off: Iris can be controlled.
Lit: Iris operation is disabled (locked).
Flashing: Due to iris adjustment from another device, the adjustment value and the
[IRIS] lever position do not match.
If you adjust the [IRIS] lever to match the iris position of the camera while viewing the iris
n
gauge that appears at the bottom of the LCD panel (status screen), the button will turn
off and normal control will be possible.
A.
IRIS position of the camera
B.
[IRIS] lever position
This also flashes if the camera adjustment values and [IRIS] lever position are offset
n
when the control target camera is switched. At the point in time when the [IRIS] lever is
moved to the position that matches the camera adjustment values, the button turns off
and normal control becomes possible.
- 31 -
The [IRIS] lever will operate at its most sensitive
range.
The [IRIS] lever will operate at its least sensitive
range.
B A
Parts and their functions