Configuring Cisco Bbsm Radius Settings For A User Group - Cisco Servers User Manual

Chapter 6 Setting Up and Managing User Groups
Step 6
Step 7

Configuring Cisco BBSM RADIUS Settings for a User Group

Note
Step 1
Step 2
Step 3
Step 4
78-13751-01, Version 3.0
To save the group settings you have just made, click Submit.
For more information, see the
on page 6-50.
To continue specifying other group settings, perform other procedures in this
chapter, as applicable.
Cisco BBSM RADIUS represents only the Cisco BBSM RADIUS VSAs. You
must configure both the IETF RADIUS and Cisco BBSM RADIUS attributes.
To hide or display Cisco BBSM RADIUS attributes, see the
Configuration Options for RADIUS (Cisco BBSM)" section on page
To configure and enable Cisco BBSM RADIUS attributes to be applied as an
authorization for each user in the current group, follow these steps:
Confirm that your IETF RADIUS attributes are configured properly.
For more information about setting IETF RADIUS attributes, see the
"Configuring IETF RADIUS Settings for a User Group" section on page
In the navigation bar, click Group Setup.
Result: The Group Setup Select page opens.
From the Group list, select a group, and then click Edit Settings.
Result: The Group Settings page displays the name of the group at its top.
From the Jump To list at the top of the page, choose RADIUS (Cisco BBSM).
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
Configuration-specific User Group Settings
"Saving Changes to User Group Settings" section
"Setting Protocol
3-20.
6-34.
6-45