Disabling Ciscosecure Database Replication; Database Replication Event Error Alert Notification - Cisco Servers User Manual

Chapter 8 Establishing Cisco Secure ACS System Configuration

Disabling CiscoSecure Database Replication

Step 1
Step 2
Step 3
Step 4
Step 5
Step 6

Database Replication Event Error Alert Notification

78-13751-01, Version 3.0
You can disable scheduled CiscoSecure database replications without losing the
schedule itself. This allows you to cease scheduled replications temporarily and
later resume them without having to re-enter the schedule information.
To disable CiscoSecure database replication, follow these steps:
Log in to the primary Cisco Secure ACS server's HTML interface.
In the navigation bar, click System Configuration.
Click CiscoSecure Database Replication.
Result: The Database Replication Setup page appears.
In the Replication Components table, clear all check boxes.
In the Replication Scheduling table, select the Manually option.
Click Submit.
Result: Cisco Secure ACS does not permit any replication to or from this
Cisco Secure ACS server.
If replication fails, Cisco Secure ACS displays an error message in red at the top
of the Database Replication page. In addition to error notification, the message
also displays the error code generated by the last unsuccessful run and suggests
you check the error log messages generated for previous failures. To acknowledge
and close the message, click OK.
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
CiscoSecure Database Replication
8-23