Table of Contents
Advertisement
Quick Links
Cisco Multiband Wall-Mount Antenna
(AIR-ANTM5560P-R)
This document outlines the specifications and describes the AIR-ANTM5560P-R multiband wall-mount
antenna and contains the following sections:
•
•
•
•
•
•
•
•
•
•
•
•
Cisco 90-Day Limited Hardware Warranty Terms
There are special terms applicable to your hardware warranty and various services that you can use
during the warranty period. Your formal Warranty Statement, including the warranties and license
agreements applicable to Cisco software, is available on Cisco.com. Follow these steps to access and
download the Cisco Information Packet and your warranty and license agreements from Cisco.com.
1.
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2005 Cisco Systems, Inc. All rights reserved.
Cisco 90-Day Limited Hardware Warranty Terms, page 1
Overview, page 3
Technical Specifications, page 3
System Requirements, page 7
Installation Guidelines, page 8
Safety Instructions, page 9
Installation Instructions, page 10
Obtaining Documentation, page 13
Documentation Feedback, page 14
Cisco Product Security Overview, page 14
Obtaining Technical Assistance, page 15
Obtaining Additional Publications and Information, page 17
Launch your browser, and go to this URL:
http://www.cisco.com/univercd/cc/td/doc/es_inpck/cetrans.htm
The Warranties and License Agreements page appears.
Advertisement
Table of Contents
Related Manuals for Cisco Cisco Multiband Wall-Mount Antenna AIR-ANTM5560P-R
Summary of Contents for Cisco Cisco Multiband Wall-Mount Antenna AIR-ANTM5560P-R
- Page 1 Cisco Information Packet and your warranty and license agreements from Cisco.com. Launch your browser, and go to this URL: http://www.cisco.com/univercd/cc/td/doc/es_inpck/cetrans.htm The Warranties and License Agreements page appears. Corporate Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA © 2005 Cisco Systems, Inc. All rights reserved.
- Page 2 Cisco 90-Day Limited Hardware Warranty Terms To read the Cisco Information Packet, follow these steps: Click the Information Packet Number field, and make sure that the part number 78-5235-03A0 is highlighted. Select the language in which you would like to read the document. Click Go.
-
Page 3: Technical Specifications
Overview The AIR-ANTM5560P-R antenna operates in the 2.4- and 5-GHz bands, and is designed for use with spatial-diversity access point (AP) systems. The AIR-ANTM5560P-R antenna is compatible with Cisco 802.11a/b/g radio products using a reverse-polarity threaded Neill-Concelman (RP-TNC) connector. Figure 1 shows the AIR-ANTM5560P-R antenna. - Page 4 Technical Specifications Connector type Enclosure Environment Mounting 1. VSWR = voltage standing wave ratio Figure 2 shows the H-plane radiation pattern at 2.4- to 2.5-GHz for the AIR-ANTM5560P-R antenna. Figure 2 H-Plane Pattern at 2.4- to 2.5-GHz Cisco Multiband Wall-Mount Antenna (AIR-ANTM5560P-R) RP-TNC Acrylic/PVC Indoor only...
- Page 5 Figure 3 shows the E-plane radiation pattern at 2.4- to 2.5-GHz for the AIR-ANTM5560P-R antenna. Figure 3 OL-6847-01 E-Plane Pattern at 2.4- to 2.5-GHz Cisco Multiband Wall-Mount Antenna (AIR-ANTM5560P-R) Technical Specifications...
- Page 6 Technical Specifications Figure 4 shows the H-plane radiation pattern at 4.9- to 5.99-GHz for the AIR-ANTM5560P-R antenna. Figure 4 H-Plane Pattern at 4.9- to 5.99-GHz Cisco Multiband Wall-Mount Antenna (AIR-ANTM5560P-R) OL-6847-01...
-
Page 7: System Requirements
Figure 5 shows the E-plane radiation pattern at 4.9- to 5.99-GHz for the AIR-ANTM5560P-R antenna. Figure 5 System Requirements The AIR-ANTM5560P-R antenna requires a Cisco 802.11a/b/g radio product that uses a RP-TNC connector. OL-6847-01 E-Plane Pattern at 4.9- to 5.99-GHz Cisco Multiband Wall-Mount Antenna (AIR-ANTM5560P-R) System Requirements... -
Page 8: Installation Guidelines
Installation Guidelines Installation Guidelines In addition to antenna orientation, wireless access point installation location with respect to all wireless clients plays a significant role in determining overall network performance. Clients at the furthest coverage points might have 10% to 50% of the bandwidth of clients close to it. Wireless network coverage in one area or location might need to be lowered to improve the performance of other clients. -
Page 9: Safety Instructions
Caution We recommend you avoid installing wireless antennas in or near rack-mounted installations that include networking equipment and computer servers whose radiated noise emissions can severely degrade radio performance. To extend the coaxial cable included with your antenna, we recomend a low-loss or ultra-low-loss •... -
Page 10: Installation Instructions
Installation Instructions Installation Instructions The following sections contain procedures for installing the antenna on a wall or pole. The following parts are included with your antenna: Molded antenna mount • Molded wall mount • Articulating arm • Four 8-32 nylon lock nuts •... - Page 11 Figure 6 Wall anchors 8-18 x 3/4-in. self-tapping Phillips screws Molded antenna mount To mount the antenna on a wall, follow these steps: Step 1 Choose a location for mounting. Step 2 If an extension coaxial cable is used, connect it to the access point and extend the coaxial cable to the location for mounting the antenna.
-
Page 12: Mounting On A Pole
Installation Instructions Loosen the screws on the articulating arm to position the antenna as desired. When you are finished Step 12 positioning the antenna, tighten all the screws. If an extension coaxial cable is used, connect it to the antenna cable. Step 13 Mounting on a Pole This section provides instructions for mounting the antenna on a pole. -
Page 13: Obtaining Documentation
Cisco documentation and additional literature are available on Cisco.com. Cisco also provides several ways to obtain technical assistance and other technical resources. These sections explain how to obtain technical information from Cisco Systems. Cisco.com You can access the most current Cisco documentation at this URL: http://www.cisco.com/univercd/home/home.htm... -
Page 14: Ordering Documentation
Nonregistered Cisco.com users can order documentation through a local account representative by • calling Cisco Systems Corporate Headquarters (California, USA) at 408 526-7208 or, elsewhere in North America, by calling 1 800 553-NETS (6387). Documentation Feedback You can send comments about technical documentation to bug-doc@cisco.com. -
Page 15: Reporting Security Problems In Cisco Products
Reporting Security Problems in Cisco Products Cisco is committed to delivering secure products. We test our products internally before we release them, and we strive to correct all vulnerabilities quickly. If you think that you might have identified a vulnerability in a Cisco product, contact PSIRT: •... -
Page 16: Submitting A Service Request
Obtaining Technical Assistance Use the Cisco Product Identification (CPI) tool to locate your product serial number before submitting Note a web or phone request for service. You can access the CPI tool from the Cisco Technical Support Website by clicking the Tools & Resources link under Documentation & Tools. Choose Cisco Product Identification Tool from the Alphabetical Index drop-down list, or click the Cisco Product Identification Tool link under Alerts &... -
Page 17: Obtaining Additional Publications And Information
CCSP, CCVP, the Cisco Square Bridge logo, Follow Me Browsing, and StackWise are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, and iQuick Study are service marks of Cisco Systems, Inc.; and Access Registrar, Aironet, ASIST, BPX, Catalyst, CCDA, CCDP,... - Page 18 Obtaining Additional Publications and Information Cisco Multiband Wall-Mount Antenna (AIR-ANTM5560P-R) OL-6847-01...