Starting The Programme; Changing Programme; Laundry Unloading - AEG 7040 TWF User Manual

Starting the programme

Press the START PAUSE button (6). The programme is started.
The programme phase is shown in LCD by appropriate icon:
– - drying phase indication
– - cooling phase indication
– - anti-crease phase indication
During program selection all appropriate phase icons are displayed. When program is star-
ted only current cycle phase is indicated by single icon.

Changing programme

To change a programme which has been selected by mistake once the programme has star-
ted, first turn the programme selector to OFF (AUS) and then reset the programme.
The programme cannot longer be changed directly once the programme has started. If nev-
ertheless there is an attempt to change the programme on the programme dial, the pro-
gramme progress display and the maintenance indicators flash. If an option (excluding the
buzzer ) is set, Err appears in the multidisplay. The drying programme is not however affec-
ted by this (laundry protection).

Laundry unloading

Once the drying cycle is complete, display shows a blinking
on LCD. If the BUZZER (SIGNAL) button (4) has been pressed, an acoustic signal sounds in-
termittently for about one minute.
The drying cycles are automatically followed by an anti-crease phase which lasts around 30
minutes. The drum rotates at intervals during this phase. This keeps the laundry loose and
free of creases. The laundry can be removed at any time during the anti-crease phase. (The
laundry should be taken out towards the end of the anti-crease phase at the latest to pre-
vent creases from forming.) If LONG ANTI-CREASE (KNITTERSCHUTZ PLUS)
been selected, the anti-crease phase is lengthened by 60 minutes.
1. Open door.
2. Before removing the laundry, remove fluff from the micro-fine filter. It is best to use a
damp hand for this purpose. (See "Care and cleaning" chapter.)
3. Remove laundry.
4. Turn the programme selector to OFF (AUS) .
After each drying cycle:
- Clean the micro-fine filter and fine filter
- Drain the condensed water container
(See chapter "Care and cleaning".)
5. Close the door.
Daily use
, anti-crease icon appears
function has
43