Installing Cisco IP/TV 3427 Broadcast Server Units
Installing the Chassis in the Rack
Step 1
Step 2
Cisco IP/TV 3400 Series Servers User Guide
3-22
To install the IP/TV Server in a rack, follow these steps:
Push outward on the slide-rail latch (labeled 1 in
to open the slide rail. The latch will engage and stay open. Open the other end of
the slide rail. Repeat the entire process for the other slide rail.
Figure 3-17 Latching the Slide Rails
1
Slide rail latch
Align the slide rail with the front mounting flange. Use the score mark on the slide
rail (labeled 1 in
Figure
latch to close the latch and secure the slide rail. Do the same for the front of the
other slide rail. Then do the same for the rear of both slide rails.
1
2
2
Right slide rail
3-18) to align the slide rail. Push outward on the slide rail
Chapter 3
Installing the IP/TV Server
Figure
3-17). Pull the latch back
OL-4467-01