Cleaning The Binder - Canon Perfect Binder-F1 User Manual

Cleaning the Binder

Clean the outside of the machine if it gets dirty after using it for a long period of
time. Please note the following points to prevent malfunctions or electric shock
when cleaning the machine.
2
WARNING

When cleaning the machine, turn OFF the power switch of the printer and
disconnect the power cord from the power outlet. It may result in a fire or
electrical shock.

Never plug in or unplug the power plug while your hands are wet. Doing so
creates the risk of electric shock.

Always grasp the power plug when disconnecting the power cord. Pulling on
the power cord may expose or snap the core wire, or otherwise damage the
power cord. If the power cord is damaged, this could cause current to leak,
resulting in a fire or electrical shock.

Do not use alcohol, benzene, paint thinner, or other flammable substances. The
volatile or flammable materials could come in contact with the machine's
electronic components and cause a fire or a short circuit.
IMPORTANT

Do not use any cleanser other than water or a neutral cleanser diluted with water. Doing
so may cause the machine's plastic parts to deteriorate or crack.

Be sure to dilute any neutral cleanser with water.

The machine does not need to be lubricated. Do not lubricate the machine.
1
2
2-20

Cleaning the Binder

Turn OFF the power switch of the printer and disconnect the
power cord from the power outlet.
Dampen a soft cloth in water or neutral cleanser that has been
diluted with water and then thoroughly wring it out before
wiping any dirt from the machine.
After cleaning the machine with a neutral cleanser, be sure to wipe off the neutral
cleanser with a cloth that has been dampened with water.