Advertisement
2
ATW Wireless System
7.2. Turning on Power
When the wireless receiver is powered by indoor unit after installation,
green
LED and orange
7.3. Wireless Receiver Functions
(1) Normal mode
When the wireless receiver is paired with a wireless remote controller,
green
LED comes on. When the wireless receiver is communicat-
ing with a wireless remote controller, green
(2) Pairing mode
*For details, refer to "6. Pairing process" in this manual.
(3) Resetting pairing information
Once pairing information has been cleared, ALL the wireless remote controllers need go through a pairing process
again.
Hold down
button for 5 seconds or more until
light while pairing mode is active. All the pairing information is cleared.
D-24
LED blink for 3 seconds.
LED blinks.
and
Power ON
Not paired
Paired
Transmitting
LED
Optional parts
Advertisement
