Mitsubishi Electric EHWT17D-MHEDW Data Book page 12

7
Water to Water Heat Pump (WTW)
Service access diagrams
Service access
Parameter
a
b
c (distance behind unit not visible
in Figure 7.1.2)
d
e
<Table 7.1.2>
* An additional space is required, when brine pipe connecting
to the side.
** Including service space for Module removal.
Sufficient space MUST be left for the provision of discharge
pipework as detailed in National and Local Building Regula-
tions.
The heat pump unit must be located indoors and in a frost-
free environment, for example in a utility room, to minimise
heat loss from stored water.
Dimension (mm)
300
150
10
700**
150*
a
e b
d
<Figure 7.1.2>
Service access
B-209