Cisco 860 Series Hardware Installation Manual page 52

Installing the Router
When choosing a location for wall-mounting the router, consider cable limitations and wall structure.
Tip
To mount the router on a wall, follow these steps:
Determine the required distance between mounting holes on the router.
Step 1
holes located on the underside of the router.
Note
Figure 2-4
1
1 Wall-mount holes
Insert the screws, with anchors, into the wall. Leave 1/8 inch (0.32 cm) between the screw head and the
Step 2
wall. See
Hang the router on the screws, and place the power adapter on a nearby horizontal surface. See
Step 3
Figure
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
2-8
For most router models, the distance between mounting holes is 8.2 inches (208 mm), as shown
in Figure 2-4. For the Cisco 866 and Cisco 867 models, the distance is 7.85 inches (199 mm).
Verify the required distance before drilling the holes.
Wall-mount Holes on the Underside of the Router
8.200 in.
Figure 2-5.
2-5.
Chapter 2 Installing the Router
Figure 2-4 shows the wall-mount
3.673 in.
1
5.961 in.
OL-16193-07