At The End Of A Wash Cycle - Baumatic BD696SS Instruction Manual

At the end of a wash cycle

o When the wash cycle has completed, the LCD display will show
"0" and an audible signal will sound. The "0" will disappear from
the LCD display after 10 minutes but the audible signal will
repeat every 10 minutes, until the dishwasher is switched off.
o IMPORTANT: The door should only be opened when the door
locked icon (N) is not lit. The door locked icon will remain on for
approximately 2 minutes after the wash cycle has completed.
o When the door locked icon has gone out, use the ON/OFF key
(A) to switch the dishwasher off.
o IMPORTANT: You should leave the appliance for 15 minutes
BEFORE opening the door. This will allow the steam generated
from the final rinse(s) to dry the dishes.
o Carefully open the door of the appliance (as described on page
21) and leave it ajar for a few minutes, to allow any remaining
steam to disperse.
o WARNING: Hot steam may escape when the door is first
opened, so care should be taken.
o Unload the dishwasher; you should take care in case any of the
items are still warm.
o IMPORTANT: If you leave the door of the dishwasher shut and
do not unload the dishwasher for a prolonged period of time,
then you may get water droplets reforming on the washload.
23