Setting A Delay Start; At The End Of A Wash Cycle - Baumatic BDI450SS Instruction Manual

o After the spray arms have stopped working you can then open
the door completely.
o Introduce the additional dishes into the dishwasher.
o Close the dishwasher door ensuring it is securely shut.
o After approximately 10 seconds the dishwasher will continue the
washing program.

Setting a delay start

o You can delay the start of the washing cycle by programming the
dishwasher to begin after 3, 6, 9 or 12 hours.
o To program a delay start you should load the dishwasher
according to the instructions in the "Setting a wash program"
section. After
compartment and selecting a program you should then set the
delay start before closing the dishwasher door.
o To do so, press the delay start button (4) repeatedly to scroll
through the time options. When the required time delay is lit on
the display you should release all button and then close the
door.
o The delay start indicator (5) will display the programmed time.

At the end of a wash cycle

o When the washing cycle is complete, a buzzer will sound for 8
seconds and then switch off.
o Before opening the dishwasher door you should press the power
switch (1) to turn the appliance off and shut off the water
supply.
o IMPORTANT: You should wait about 15 minutes before
unloading the dishwasher to avoid handling the dishes
and utensils while they are still hot and more susceptible
to breakage. They will also dry better.
o WARNING: Hot steam may escape when the door is first
opened, so care should be taken.
o It is normal for the dishwasher to be wet inside after a program.
loading the basket, filling the detergent
23