Table of Contents
Advertisement
Water outlet
Connect the drain hose to the rear of the appliance.
Place the end of the drain hose on your drain pipe. Push it a
short way down into your drain pipe. The drain hose should be in
the shape shown in the above line drawing.
IMPORTANT: Do not place the drain hose higher than 800 mm.
IMPORTANT: Do not insert the drain hose too deeply into the
water pipe, as this may cause siphoning.
Secure the drain hose, so that it cannot move whilst the
dishwasher is in use.
A drain hose hook is supplied and should be attached in one of
the two ways shown in the diagram below.
If you are placing the drain hose into a sink, then you should
make sure it is secured to the sink or use a cord to fix it in
position.
40
Advertisement
Table of Contents
