Table of Contents
Advertisement
The following is a list of items shipped with the
roller system. Before beginning setup, lay these
items out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
NOTICE
If you cannot find an item on this list,
carefully check around/inside the equip-
ment and packaging materials. Often, these
items get lost in packaging materials while
unpacking or they are pre-installed at the
factory.
Inventory (Figures 1–2)
A. Roller System ............................................. 1
B. Mounting Stud Pads M8-1.25 ..................... 2
C. Hex Bolts M8-1.25 x 25 .............................. 4
D. Lock Washers 8mm.................................... 4
E. Hex Nuts M8-1.25 ....................................... 4
F.
Flat Washers 8mm ..................................... 6
G. Mounting Template (Not Shown) ................ 1
-6-
Inventory
A
Qty
Figure 1. Roller system.
B
D
F
Figure 2. Loose inventory.
Model T32428 (Mfd. Since 11/21)
C
E
Advertisement
Table of Contents
