Installing The Cisco Wide Area Application Engine - Cisco Wide Area Application Engine 612 Hardware Installation Manual

Installing the Cisco Wide Area
Application Engine
This chapter explains how to install the Cisco Wide Area Application Engine
(WAE) 512 and WAE 612 into an equipment rack. It also provides general
instructions for installing the device on a table or workbench. This chapter
contains the following sections:
•
•
•
•
•
•
Before you begin the installation, read the Regulatory Compliance and Safety
Information for the Cisco Content Networking Product Series document that
shipped with your device.
Read the installation instructions before connecting the system to the power
Warning
source. Statement 1004
OL-9137-02
Tools and Parts Required, page 3-2
Installing the Cisco Wide Area Application Engine, page 3-2
Connecting Cables, page 3-13
Connecting Power and Booting the System, page 3-15
Checking the LEDs, page 3-15
Removing or Replacing a Cisco Wide Area Application Engine, page 3-15
Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide
C H A P T E R
3
3-1