Optional Accessories - Makita DGD800 Instruction Manual

OPTIONAL
ACCESSORIES
CAUTION:
• These accessories or attachments are recom-
mended for use with your Makita tool specified
in this manual. The use of any other accessories
or attachments might present a risk of injury to
persons. Only use accessory or attachment for
its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
Side handle (accessory)
► Fig.12
► Fig.13
► Fig.14
► Fig.15
When using the side handle, remove the rubber protec-
tor, insert the side handle on the tool barrel as far as it
will go and rotate it to the desired angle. Then tighten
the handle firmly by turning clockwise.
CAUTION:
• When using the tool without handle, always
install the rubber protector on the tool.
• When installing the rubber protector, always
push it onto the tool so that the top round
recessed shape of the rubber is positioned near
the switch position.
• Wheel points
• Collet cone (3 mm, 6 mm, 8 mm, 1/4", 1/8")
• Collet nut
• Wrench 13
• Side handle set
• Makita genuine battery and charger
NOTE:
• Some items in the list may be included in the
tool package as standard accessories. They
may differ from country to country.
9 ENGLISH