Table of Contents
Advertisement
Verifying the Package Contents
Figure 2-1
Table 2-1
Component
10/100 BaseT connector
Serial connector
RST button
GK Reg and MC LEDs
CPU High LED
ACT LED
ALARM LED
10/100 BaseT LEDs
Verifying the Package Contents
Procedure
Step 1
Inspect the contents of the box for shipping damage.
Report any damage or missing items to your Cisco representative.
Step 2
Step 3
Verify the package contents for the Cisco Unified Videoconferencing 3515 MCU unit. See
Installation and Upgrade Guide for Cisco Unified Videoconferencing 3515 MCU12 and MCU 24 Releases 5.6 and 5.7
2-2
Cisco Unified Videoconferencing 3515 MCU Front Panel
SERIAL
RST
10/100 Base T
SERIAL
RST
10/100 Base T
Front Panel Components
Description
An RJ-45 connector that provides the primary Ethernet connection
for the IP network port.
A DB-9 connector that allows you to connect a PC terminal for local
configuration.
Allows you to reset the Cisco Unified
Videoconferencing 3515 MCU unit manually.
Lights green when the Cisco Unified
Videoconferencing 3515 MCU is registered with a gatekeeper, or
when there is no gatekeeper registered and the auto attendant feature
is enabled.
Lights green when more than 50% of the Cisco Unified
Videoconferencing 3515 MCU unit resources are in use.
Lights green to indicate that there is at least one currently active
conference on the Cisco Unified Videoconferencing 3515 MCU
unit.
Lights green to indicate that an error has occurred and the
Cisco Unified Videoconferencing 3515 MCU unit requires
resetting.
The top part of the 10/100 BaseT connector contains two LED
indicators. The left-hand LED lights green when the local IP
network link is active. The right-hand LED lights green if the
connection speed is 100 Mbps, and is off when the connection speed
is 10 Mbps.
Chapter 2
Setting Up Your Cisco Unified Videoconferencing 3515 MCU
GK Reg
CPU Hight
ALARM
ACT
MC
CPU Hight
ALARM
ACT
PWR
Table
2-2.
OL-17012-01
Advertisement
Table of Contents
