Adding Users To Cisco Unified Communications Manager; Managing The User Options Web Pages; Giving Users Access To The User Options Web Pages; Specifying Options That Appear On The User Options Web Pages - Cisco 7937G - Unified IP Conference Station VoIP Phone Administration Manual

Chapter 5 Configuring Features, Templates, Services, and Users

Adding Users to Cisco Unified Communications Manager

Adding users to Cisco Unified Communications Manager allows you to display and maintain
information about users and allows each user to perform these tasks:
•
•
•
•
You can add users to Cisco Unified Communications Manager using either of these methods:
•
•

Managing the User Options Web Pages

From the User Options web page, users can customize and control several conference station features
and settings. For detailed information about the User Options web pages, refer to Cisco Unified IP
Conference Station 7937G Phone Guide for Cisco Unified Communications Manager 6.0.

Giving Users Access to the User Options Web Pages

Before a user can access the User Options web pages, you must use Cisco Unified Communications
Manager Administration to configure the user as an End User. You must also associate appropriate
conference stations with the user, and add the user to a user group. To select and configure an end user,
log on to Cisco Unified Communications Manager Administration and choose User Management >
End User. To add a user to a user group, choose User Management > User Group.
For additional information, refer to Cisco Unified Communications Manager Administration Guide,
"End User Configuration" section.

Specifying Options that Appear on the User Options Web Pages

Most options on the User Options web pages appear by default. However, two options that do not appear
by default are:
•
•

Cisco Unified IP Conference Station 7937G Administration Guide for Cisco Unified Communications Manager 6.0

OL-11560-01 Rev. B0
Access the corporate directory and other customized directories from a conference station
Create a personal directory
Set up speed dial and call forwarding numbers
Subscribe to services that are accessible from a conference station
To add users individually, log on to Cisco Unified Communications Manager Administration and
choose User Management > End User. To add users to user groups, choose User Management >
User Group.
For more information about adding users, refer to Cisco Unified Communications Manager
Administration Guide. For details about user information, refer to Cisco Unified Communications
Manager System Guide.
To add users in batches, use the Bulk Administration Tool. This method also enables you to set an
identical default password for all users.
For information about the Bulk Administration Tool, refer to Cisco Unified Communications
Manager Bulk Administration Guide.
Ring Settings
Line Text Label Settings

Adding Users to Cisco Unified Communications Manager

5-9